Installation Guide

BASE

As per your choice, you may receive a greenhouse with or without a

pre-fabricated base kit. Either way, this greenhouse must be secured

to a ﬁrm base.

The Base must be level and square.

Before assembling the greenhouse, you must prepare a proper founda-

tion. Two foundation options are provided in this manual. The con-

crete foundation option is recommended for a stronger installation.

SITE SELECTION

The greenhouse should be placed in an area that receives direct sun-

light and gets shielded from wind.

The surface must be level.

ABOUT THIS MANUAL

LEGENDS

Steps.

Follow the steps in alphabetic order, from Step A to Step B,

1111etc.

Part No. Each part is labeled with its Part No.

BOLT INSERTION

Several steps in this manual invlove inserting F4 Bolts into the groove

of Aluminum proﬁles as a preparation for further installation. Dia-

grams above illustrate how to use such inserted bolts.

F4 BOLTS AND NUTS

Part No. F4 refers to both the bolt and the nut. In some steps only the

bolt or the nut will be used and in other steps the whole set will be

used. Check the speciﬁc Part List in each step.