Lunar INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation. Installation should be carried out by a qualified electrician. Do NOT strike mirror glass with hard or pointed items. It is recommended that the product is cleaned with a soft, dry,non abrasive cloth. Do NOT use cleaning agents or abrasive materials on any type of finished surface. Do NOT allow moisture to come into contact with the electrical components.
Lunar INSTALLATION INSTRUCTIONS MODEL : /LEDCH4836 LEDCM6036/LEDCM7036 36"Wire 17727 D> /48" L0 197"MIRROR X 0.
Lunar INSTALLATION INSTRUCTIONS 1.Before your installation, make sure the location of the mirror is suitable, ensuring that the domestic main power supply is within reach of the electrical entry point of the mirror. Installation procedure 2.Use a soft pencil to mark the position of the mirror on the wall, and it is very important to make sure it is level. Remove the mirror and mark the mounting points.
Lunar INSTALLATION Installation 4.You must have a Junction box in the wall. Carefully connect the domestic main power supply to the terminal box according to the wiring diagram (Fig. 4) overleaf, Always remember that the domestic electrical main power supply to which the mirror is being connected is TURNED OFF during the installation.
