User Manual

3. LED strip circuit is
damaged.
Replace the damaged segment
of the circuit.
The LED strip has low light
intensity
1. Power supply congestion.
Replace the power supply with
a more powerful one or
increase the number of power
supply sources.
2. Conductor loss is too high.
Replace or add power wires;
change the connection of the
power supply source that
ensures that every joint has the
voltage not less than 95% of
the declared one.
3.Too many LED strips are
connected.
Connect every 5-meter line
directly to the power wire.
LEDs blink
1.The contact of power wire is
poor.
Check and restore the
soldering in the joints of
power wire with the LED
strip.
2. Conductivity trouble of the
LED strip resulting from
mechanical abuse.
Replace the damaged segment
of the circuit.
Certain LEDs do not work
1. Electrostatic breakdown
Replace non-operating LEDs.