User Manual

1) FileX:
X is the sequence number and refers to the playing DAT file name.
Press “+” to jump to the next file, press “-” to jump to the previous
file.
2) Clk Rate:
Refers to the clock scanning frequency, the range is 0.1M—12.5M.
3) Speed：
Play speed ranges from 1 to 100 frames per second, the playing speed
must be set to the same when multiple controllers are synchronized
with AC power supply.
4) Bright:
The brightness range is 0—15. For P9813, LPD6813, the brightness
can not be adjusted.
5) CycleMode
“All” refers to playing all DAT files in SD card circularly; “Single”
refers to playing the current file and can be switched by “+” or “－”
6) Port Out Mode: \ Invert Colors:
For single line chip, Port Out Mode: Select 245 or RS485 output
Invert Colors: Invert color or not
7) DMX Address
The default initial value of DMX address is 1, occupies three channels,
the three channels are respectively file, speed and brightness and