User Guide

(4). Choose playing mode:
Default playing mode is playing all DAT files in a continuous loop.
“All playback” is playing all DAT files in a continuous loop.
“Select playback” is playing single DAT file. In this mode, press “File”
after pressing sequence number of DAT file, controller will automatically
save the sequence number, next time when you power on controller, it
will play the saved sequence number of DAT file.
(5). Color modulation
Press “Selection” to enter color modulation mode. In this mode, press
“Selection” to modulate blue, press “Select playback” to modulate green,
press “All playback” to modulate red. LPD6803, LPD8806, LPD6813,
P9813 don’t support color modulation function.
6. Button Operation
(1). Four buttons are “SET”, “MOD”, “-”, “+”.
(2). “MOD” is a mode switching button, there are three modes: file mode,
speed mode and clock mode. In file mode, nixie tube displays “F” and
file sequence number, press '-' or '+' to switch files; in speed mode, nixie
tube displays “P” and playing speed, press '- ' or '+' to adjust the speed; in
clock mode, nixie tube displays “C” and clock frequency and the unit is
MHz, press '-' or '+' to adjust the frequency.
(3). Press “SET” button to save speed, playing file sequence number and
clock frequency.