User Guide

(1). H802SE has four output ports, each port drives maximum 1536
pixels
(2). Input voltage is 5 to 24 volts DC.
(3). SD card supports FAT32 and FAT16, the maximum capacity is 32G
bytes, stores up to 64 DAT files.
(4). The adjustable playing speed ranges from 1 to 200 frames per second,
the adjustable clock frequency ranges from 0.1MHZ to 2.5MHZ.
(5). H802SE has infrared remote control and nixie tube display functions.
5. Remote Control Operation
(1). Switch DAT file:
After power-on, press “File” to enter file mode, nixie tube will display
DAT file sequence number, you can press '-' or '+' to switch DAT files. Or,
you can press the sequence number of DAT file on number button and
then press “Confirmation” to switch files.
(2). Set clock frequency:
Press “Clock”, nixie tube will display the current clock frequency, unit
is MHZ. You can press '-' or '+' to change it, or you can press
“Confirmation” after entering clock frequency with number button.
(3). Set playing speed:
Range is 1—200 frames per second, press speed value with number
button and press “Confirmation” to save the value. Or, you can press '-' or
'+' to change speed.