User Manual

modeling for H802SC, must select “two line share a slave controller”.
2. Performance
1. H801SC has one output port, controls maximum 1024 pixels; H802SC
has two output ports, controls maximum 2048 pixels.
2. Use the dial switch to set the play speed, clock frequency; the SD card
can be replaced with power-on.
3. SD card supports FAT32 and FAT16 format, the maximum capacity is
64G bytes, stores maximum 64 DAT files.
4. The type of driver chip and scanning frequency are set in “LED
Control Software”.
5. Achieve encryption function by limiting the number of power-on time,
which is set in DAT file.
3. Operation Instructions
1. SD card support FAT32 and FAT16 format. Has supported SDHC
(high capacity SD card), the maximum capacity is up to 32G bytes.
Support 64 DAT files of storage, which are played based on file name
in alphabetical order. It must be formatted after times of adding or
deleting files.
2. In “LED Control Software” modeling settings, must select “SC” for
controller type.
3. When control TLS3001, there is only one output port.
4. After power–on , the controller that the indicator light flashes once is