User Manual

5、 Connection diagram
1. Multiple T-1000S controllers can be cascaded together and work synchronously.
2. T-1000S one TTL(SPI) signal and one RS485 signal port output，can control 2048 pixels；
3. When the chip for LED is single line chip just with data, then it just needs to be connected with DAT
and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then it need to
be connected with DAT, CLK, and GND of the controller.
4. If you need to use RS485 signal you need to connect controller A with LED A (DMX+), controller B with
LED B(DMX-),
5. When you need to build a new project the controller type for the software is：T-1000-IC model.