User Manual

ManualsBrandsUnbranded ManualsEnergy SavingLED RGB Controller T-1000S HTL-008 (with SD card, DMX 512, WS2811, WS2801, WS2812B, 15 A)

2012 T-1000S Operating manual

1、T-1000S System features

1、32—256 Gray，Support software Gamma correction。

2、Support the rules and special-shaped handle.

3、Single-port output，can support 2048 lights。

4、Off-line(SD Card) control, play back content stored in the SD card.

5、T-1000S store a maximum of 16 programs，copy multiple files to the SD card in order,

after formatting the SD card as “FAT” format.

6、The program must be named in orders . Ex. ：00_1.led, 01_1.led, 02_1.led.

7、Compatible with single line or double line chips.

NOTE：1. When T-1000S controller less than 512 pixels the frame rate can reach 30fps. When T-1000S

control more than 512 pixels the frame rate will slow down automatically.

2. T-1000S must use the new software LedEdit 2012.

Summary of content (7 pages)

PAGE 1
2012 T-1000S Operating manual 1、T-1000S System features 1、32—256 Gray，Support software Gamma correction。 2、Support the rules and special-shaped handle. 3、Single-port output，can support 2048 lights。 4、Off-line(SD Card) control, play back content stored in the SD card. 5、T-1000S store a maximum of 16 programs，copy multiple files to the SD card in order, after formatting the SD card as “FAT” format. 6、The program must be named in orders . Ex. ：00_1.led, 01_1.led, 02_1.led.
PAGE 2
、Chip support： Chip model Control mode Pixels(MAX) for software LPD6803,D705,1101,6909, 6912 T-1000-6803 2048 pixels LPD8806,LPD8809 T-1000-8806 2048 pixels TM1803,TM1804,TM1809,TM1 812 TM1804 and TM1809 T-1000-TM TM1903，TM1904，TM1909， T-1000-TM19 TM1912 UCS6909，UCS6912，UCS7009， UCS5903 Note T-1000-UCS-32 UCS1903，UCS1909，UCS1912 T-1000-UCS-256 2048 pixels are divided into high and low 2048 pixels 2048 pixels 2048 pixels UCS3903 T-1000-UCS-1024 2048 pixels DMX512 T-1000-DMX 170/512 pi
PAGE 3
、Appearance 4、Definition of printing： Definition of buttons： Buttons 含义保存 SET Save Settings （ to save current settings file and the playback speed ）。模式 MODE Change programs 速度 SPEED+ Speed up 速度 SPEED- Speed down Press speed+ and speed- at the same time the program will play circularly. DC5V +5V power input GND Power GND input 7．5-24V +7.5-24V power input 电源灯 POWER Power indicator 错误灯 ERROR Error indicator SD 卡 SD CARD SD card slot TTL signal（245/spi signal）： RS485 signal.
PAGE 4
5、 Connection diagram 1. Multiple T-1000S controllers can be cascaded together and work synchronously. 2. T-1000S one TTL(SPI) signal and one RS485 signal port output，can control 2048 pixels； 3. When the chip for LED is single line chip just with data, then it just needs to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then it need to be connected with DAT, CLK, and GND of the controller. 4.
PAGE 5
6、 Name of the program：（The rule of how to name the programs：） The name for NO.2 controller： “00_1.led” --------- NO.1 program for No.1 controller “01_1.led” --------- NO.2 program for No.1 controller “02_1.led” --------- NO.3 program for No.1 controller …… “15_1.led” --------- NO.16 program for No.1 controller The name for NO.2 controller： “00_2.led” --------- NO.1 program for No.2 controller “01_2.led” --------- NO.2 program for No.2 controller “02_2.led” --------- NO.3 program for No.
PAGE 6
7、Special parameters Memory card： type：SD card（suggest using high-speed SD card） Capacity：128MB—2GB Format：FAT Store file：*.led Physical parameters： Working temperature ：-30℃—85℃ Working voltage：DC5V / DC7.5-24V Working power：1W size：L165mm×W80mm×H30mm weight：0.
PAGE 7
power supply 7、 Trouble shooting Question 1：After power, the T-1000S ERROR indicator has been flashing without display output answer：The ERROR indicator flashing means the controller did not read the card correctly, possible problems: ② SD card is empty, with no effect file. ②The effect file in the SD card and the controller model do not match, please choose correct controller model in LedEdit and then re-create the effect file *led. ③SD card is not formatted to FAT before copying effect files.