How to Guide

Package contents:
1) Light bulb housing. 2) Base. 3) PCB
for LEDs. 4) Diffuser with a ring. 5) Power
supply driver. 6) LEDs. 7) Screws.
Consumables you'll need:
1) Thermal paste. 2) Thermal adhesive
tape. 3) Solder. 4) Flux.
Place the LEDs on the PCB with the
correct polarity and solder them to the
PCB.
Apply the thermal paste at the point of
contact of the PCB with the housing.
How to Make a LED Light Bulb
Apply the thermal paste to the LEDs
installation locations on the PCB.
1 2
4
65
3
1
2
5
6
7
3
4
1
3
2
4
Determine polarity of the LEDs by the "-"
sign on one of the leads (or using a
multimeter).