Instructions / Assembly

Installation and Wiring Instructions:
warehouse of tiffany,inc
NOTE：ALWAYS TURN POWER OFF BEFORE INSTALLING LIGHTING FIXTURE
IMPORTANT：YOU SHOULD USE A QUALIFIED ELECTRICIAN TO INSTALL THIS FIXTURE
ITEM:LD4012
*SAVE THIS INSTRUCTION FOR FUTURE REFERENCE.
MADE IN CHINA Revision - 02/25/15
Installation
1.Connect the chain(B) with steel tube(A).
2.Pass the fixture wire(C) through the steel ceiling
plate(D).
3.Fix the mounting plate(E) to the outlet box(F).
4.Wiring:
1).Split the conductors of the fixture wire about 4
inches. Being careful not to expose any of the wire
inside of the insulation.
2).Connect the fixture ground wire to the outlet box
ground wire using wirenut.
3).Connect the half of the fixture wire(C) that is
white marked(Neutral Wire) to the outlet box supply
wire(White). Connect the other half of the fixture
wire that is black marked(Live Wire) to the outlet
box supply wire (Black or Red). Use wirenuts
provided.
4).Spread the electrical supplies so that the black
wire are on one side of the outlet box and white
wire are on the other side.
5.Fix the steel ceiling plate(D) to the mounting
plate(E) with Mouting Screw(H) and Screw Cap(G).
6.Install the 3pcs glass shades onto the steel
tube(A).
Recommendation: Maximum 60 WATT Type
ST64 or ST58 Edison bulb(3pcs bulbs included. Pls
take care when assembling as it’s fragile).
Cleaning of your lamp:
Turn power off.Wipe with a damp cloth.Do not use
abrasives.
Outlet
Box(F)
Neutral
Wire
Live Wire
Outlet box
Supply
Ground
Wire
A
B
C
D
Glass Shade
Fixture Ground Wire
E
Mounting
Screw(H)
Box Screw
Screw Cap(G)