Instructions / Assembly

PRODUCT SPECIFICATIONS
940S-V6
INGROUND BENCH WITH BACK
Seats & Back: 11 gauge die formed angle frame 1”x1-7/8” with 3” radius corners. 3/4” #9 steel expanded metal. 7 gauge x 1-1/2” flat bar
center support and mounting bracket understructure. Electrically MIG welded.
Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior
mechanical performance, impact resistance and UV-stability.
Frame: 2-3/8” O.D. x 12 gauge pre-galvanized structural steel tubing. Seat/back support is bent over a mandrel through the bend radius
producing a wrinkle free bend. Tube ends are pre-galvanized steel capped. Seat mounting points are 7 gauge x 1-1/2” die stamped
steel flat bar. A 6” x 6” steel plate makes up the surface mount footing. The surface mount plate has four holes for stable mounting, and
clipped corners for a more finished look. All electrically MIG welded.
Frame Coating: Electrostatic powder coated application oven cured.
Hardware: All stainless steel hardware fasteners.
Dimensions: 6’ bench portable with back. Seats and back are 12” wide x 72” long. Seat height is 18”, seat back height is 35”. Total
depth of seat with back is 22-1/4”.
Page 6 of 11