Instructions / Assembly

800-45-ULTRA www.ultraplay.com
ULTRA SITE PRODUCT SPECIFICATIONS
Top & Seats: 11 gauge die formed angle frame 1”x1-7/8” with 3” radius on the seat corners. 3/4” #9 steel expanded metal. 7 gauge x
1-1/2” flat bar center support and mounting bracket understructure. Top is additionally supported to the outer frame with 7 gauge x 1-
1/2” flat bar. Electrically MIG welded.
Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior
mechanical performance, impact resistance and UV-stability.
Frame: 1-5/8” O.D. x 14 gauge pre-galvanized structural steel tubing. Brace attachment points are 1-1/2”x2”x3/16” steel flat bar. Cross
braces 1.029 O.D. x 15 gauge pre-galvanized structural steel tubing. Top is attached with 7 gauge 2”x2” die formed angle. Seat
mounting points are 7 gauge x 1-1/2” die stamped steel flat bar. Legs are bent over a mandrel through the bend radius producing a
wrinkle free bend. All electrically MIG welded.
Frame Coating: Electrostatic powder coated application oven cured.
Hardware: All stainless steel hardware fasteners.
Dimensions: Top is 46” round x 30” high. Seats are 12” wide x 40" long x 18-1/4” high. Outside to outside dimensions of 3 seat table is
82-1/4” x 70-3/4”.
358H-RDV
46” ROUND PORTABLE TABLE WITH 3 SEATS
4/7/2011 Page 6 of 12