Use And Care Manual

OPERATING INSTRUCTIONS
• Press ON/OFF to start the massage. The unit will automatically cycle
from massage modes 1 through 10 in 1 minute intervals. The unit
will power o in 15 minutes unless changed. The unit’s default intensity
is set to 5 unless changed.
• Press ON/OFF to POWER OFF the unit.
• Press INTENSITY button on the remote control to cycle the massage
intensity. The indicator strength on the remote control lllllll will
increase from 1 to 10 in two level increments
• Press AUTO button to set automatic mode. The indicator light
will illuminate on the remote and automatically cycle through the
available massage modes.
• Press TIMER to set the power o timer up to 60 minutes in 5 minute
increments. Default operation time is 15 min.
• Press MODE UP or MODE DOWN to cycle from the 10 available
vibration / massage modes.
• Press POINT button to cycle between massage areas such as back,
thighs, legs or buttocks. The # indicator light will illuminate on the
remote control
• Press HEAT button to ENABLE OR DISABLE heating function.
• Press and HOLD UP or HOLD DOWN to recline or lift the chair.
HOLD DOWN BUTTON
TO RECLINE
HOLD UP BUTTON
TO LIFT
PAGE 9