User manual

Bachmann Europe Plc
H0 1:87 7
Fig. 8 shows the removed slider with the
retaining bracket (R). The retaining bracket
snaps simply into two clip-in lugs. When
taking apart, please press the retention
arm (S) slightly outwards using a small
screwdriver.
Naturally, the wheel profi le of the wheel
sets has also been adapted to the track
system commonly in use.
The alternating current version has a
circuit board with three switches in the
roof section of unit 100. Fig. 9 shows the
position of the individual switches.
Please slide switch S3 into the position
OFF (Fig. 10) for the stop function.
For overhead operation using the pan-
tographs please slide the switch S2 to
the PAN position. S1 must be in position
AUX1 for digital operation. The interior
lighting is turned on and off here with the
decoder.
For all other operating information please
consult pages 3 - 6 under
- Altering the default settings and
opening unit 100
- Installing a decoder
- Installing a loudspeaker as well as
- Looking after your model.
Fig. 8
R
S
S1
S2
S3
AUX1DC
PAN
AC
ON
OFF
S1
S2
S3
Fig. 9
Fig. 10