User manual

Bachmann Europe Plc

4 H0 1:87

AUX1DC

PAN

TRACK

OFF

If you wish to run the car in block track

operation or have it automatically stop in a

terminus, please switch the switch S3 to OFF

(Fig. 3a). This will ensure that power pick up

only takes place at the end carriage that is

currently fronting the train.

Switch S2 enables you to switch the power

pick up from wheel contact to overhead

contact operation.

Switch S1 enables you to switch the interior

lighting on and off. For digital operation the

switch is set to AUX1; interior lighting is

activated from the decoder.

Installing a Decoder

The digital interface (DS) with 21 + 2 plug contacts (Fig. 4) is located on the same circuit

board as the three function switches. The installed interface board (SP) with its total of 23

plug contacts carries the switching for the stop function. If you wish to convert to digital

operation by installing a decoder (DEC), the stop function is deactivated.

Fig. 3a

Fig. 4

DEC