Installation Guide

APRON SINK APPLICATION
STEP 1 - CHOOSE A MOUNTING STYLE
Exclusive Heritage apron sinks are designed to be installed with the front of the sink protruding out about
3/4” beyond the front countertop edge. Choose a mounting style from Figure A, B or C. Discuss the best
mounting style with your customer as counter design can vary.
STEP 2 - CHOOSE APRON REVEAL OPTIONS
Once a mounting style has been determined, choose the reveal length option based on your aesthetic
preference. e sink may protrude 1/4” to 1 1/4” outward. (Figure 2.1, Figure 2.2)
Figure A - Apron
1/4” Reveal
Figure 2.1
Figure B - Flush Mount Figure C - Built-Up Mount
Figure 2.2
Figure 3
1 1/4” Reveal
STEP 3 - BUILD A SINK BASE CABINET SUPPORT
Exclusive Heritage apron sinks requires a solid
supporting structure with crossbeams or plywood built
inside the cabinet. e frame should be able to support
a minimum weight of 195 pounds. Allow enough spaces
for routing plumbing, drain pipe, garbage disposal,
electrical access, etc.
(Figure 3)
BASE SUPPORT