Installation Guide

STEP 5 - INSTALL TOP MOUNT SINK ON
COUNTERTOP
Use a rag and denatured alcohol to clean the top •
edge of the countertop opening. Also clean the
underside rim of the sink to remove any dirt or
residues. (Figure 5.1)
Apply a small bead of silicone caulk around the •
countertop opening where the sink rim overlaps
the countertop.
Place the sink into the opening and align the sink •
evenly around all four edges. (Figure 5.2)
From the underside of the sink, carefully •
rotate and snap all brackets in place against the
underside of the countertop (a ashlight might be
handy). Slightly tighten the fasteners by hand to
prevent brackets from moving.
Ensure all four edges are evenly spaced. With a •
screw driver, tighten all screws from underside of
the sink. Do not over-tighten. (Figure 5.3)
Promptly clean all excess caulking materials •
around the top rim by following the cleaning
direction printed on the caulking label.
STEP 6 - INSTALL PLUMBING AND CHECK
LEAKS
Once ample of time is given for the silicone to cure,
install garbage disposal, drain pipe, strainer,
faucet, etc.
Run a small amount of water rst to check •
for leaks. (Figure 6)
Make adjustments or repairs as necessary.•
Re-apply silicone caulk around the sink •
perimeter to seal any gaps.
DENATURED
ALCOHOL
Figure 5.1
Figure 5.2
Figure 5.3
Figure 6
TOP MOUNT SINK APPLICATION