Datasheet

ManualsBrandsUnbranded ManualsLEDs & AccessoriesSMD LED 1104 Red 12 mcd 120 ° 20 mA 2 V

SPEC NO: DSAA4062 REV NO: V.18A DATE: MAR/20/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203000559

3.0mmx1.0 mm RIGHT ANGLE SMD

CHIP LED LAMP

Part Number: KPA-3010EC High Efficiency Red

Features

z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness.

z Low power consumption.

z Wide viewing angle.

z Ideal for back light and indicator.

z Various colors and lens types available.

z Package : 2000pcs / reel.

z Moisture sensitivity level : level 3.

z Tinned pads for improved solderability.

z RoHS compliant.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.15(0.006") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

4.The device has a single mounting surface. The device must be mounted according to the specifications.

Kingbright

Summary of content (5 pages)

PAGE 1
3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: KPA-3010EC High Efficiency Red Features Description z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Wide viewing angle. Light Emitting Diode. z Ideal for back light and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3.
PAGE 2
Selection Guide Part No. Dice KPA-3010EC Iv (mcd) [2] @ 20mA Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Min. Typ. 8 15 *3 *6 Water Clear 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3.Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
High Efficiency Red KPA-3010EC K g in g i r b t h SPEC NO: DSAA4062 REV NO: V.18A DATE: MAR/20/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.
PAGE 4
KPA-3010EC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) K g in g i r b t h Reel Dimension SPEC NO: DSAA4062 REV NO: V.18A DATE: MAR/20/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.
PAGE 5
PACKING & LABEL SPECIFICATIONS KPA-3010EC t h g i r b g in K Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAA4062 REV NO: V.18A DATE: MAR/20/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.