Instructions / Assembly

Drill 7/32” pilot holes at each mark.
Place one lag screw through the middle hole #1 through
a spacer. Do not fully thighten. Repeat process with holes #2 and
#3. Use a level on top of the rail to ensure it is properly levelled,
then thighten the 3 lag screws.
NOTE Lag screws #4 and #5 will be installed later.
Make sure to align the trolley and the screws
with the holes.
Secure the trolley by tightening both screws.
Repeat with the second trolley.
IMPORTANT - PLEASE READ ALL INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION.
• These instructions are for a single door installation.
• Identify secure points on the wall to attach the rail before starting your installation.
• It is necessary that all the lag screws used to install the rail are secured to the wall stud (2 x 3 structure).
• Use a wood plank secured to the wall stud if you are unable to fix all lag screws in wall stud.
#1
#2
#4
#3
#5
1.3
1.4
2. Installing door hangers
2.1 2.2
[e-mail]
colonialelegance.com
colonialelegance inc.
[e-mail]
colonialelegance.com
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
colonialelegance inc.
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8
[e-mail]
colonialelegance.com
colonialelegance inc.
[e-mail]
colonialelegance.com
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
colonialelegance inc.
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8
[e-mail]
colonialelegance.com
colonialelegance inc.
[e-mail]
colonialelegance.com
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
colonialelegance inc.
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8