Instructions / Assembly

83
DETAILED MAINTENANCE
Adjustment After Use:
1. Remove dust cap.
2. Tap the crank arm lightly with a mallet.
3. Retighten the flange nuts, and refit the dust caps.
New cotterless cranks may become loose with initial use.
Perform the following task after several hours of riding,
and repeat it two or three times after further use. Cranks
should then remain tight.
Screw in the removal tool.
Turn the screw bolt
clockwise.
Position the crank on the axle.
Lightly tap the crank
onto the axle.
Tighten the flange nut.
Replace the dust cap.