Instructions / Assembly

BEFORE YOU RIDE

5. Bearings

– Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling.

– Check headset, wheel bearings, pedal bearings and bottom bracket bearings.

6. Cranks and Pedals

– Ensure pedals are securely tightened to the cranks.

– Ensure cranks are securely tightened to the axle and are not bent.

7. Derailleurs

– Check that front and rear mechanisms are adjusted and function properly.

– Ensure control levers are securely attached.

– Ensure derailleurs, shift levers and control cables are properly lubricated.

8. Frame and Fork

– Check that the frame and fork are not bent or broken.

– If either are bent or broken, they should be replaced.

9. Accessories

– Ensure that all reflectors are properly fitted and not obscured.