Instructions / Assembly

13
BEFORE YOU RIDE
SAFETY CHECKLIST
Before every ride, it is important to carry out the following safety checks:
1. Brakes
– Ensure front and rear brakes work properly.
– Ensure brake shoe pads are not over worn and are correctly positioned in relation to the rims.
– Ensure brake control cables are lubricated, correctly adjusted, and display no obvious wear.
– Ensure brake control levers are lubricated and tightly secured to the handlebar.
2. Wheels and Tires
– Ensure tires are inflated to within the maximum recommended limit as displayed on the tire side wall.
– Ensure tires have tread and have no bulges or excessive wear.
– Ensure rims run true and have no obvious wobbles or kinks.
– Ensure all wheel spokes are tight and not broken.
– Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure locking levers are correctly
tensioned and in the closed position.
3. Steering
– Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.
– Ensure that the handlebars are set correctly in relation to the forks and the direction of travel.
– Check that the head set locking mechanism is properly adjusted and tightened.
– If the bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened.
4. Chain
– Ensure chain is oiled, clean and runs smoothly.
– Extra care is required in wet or dusty conditions.