Instructions / Assembly

TOOLS REQUIRED
Your new bicycle was assembled and tuned in the factory and then partially disassembled for shipping. You may
have purchased the bicycle already fully reassembled. The following instructions will enable you to prepare your
bicycle for years of enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment
of any area, please refer to the relevant sections in this manual. If you need replacement parts or have any
questions pertaining to assembly of your bicycle, call Cycle Force Group Bicycles direct at:
CYCLE FORCE GROUP BICYCLES SERVICE AND TECHNICAL SUPPORT:
1-877-245-3243
Monday – Friday 8:00 am – 5:00 pm Central Time
To avoid injury, this product must be properly assembled before use. If your bicycle was obtained assembled, we
strongly recommend that you review the complete assembly instructions, and perform checks specified in this
manual before riding.
Tools Required:
Phillips head screwdriver; 4mm, 5mm, 6mm and 8mm Allen
Keys; adjustable wrench or a 9mm, 10mm, 14mm and
15mm open and box end wrenches; and a pliers with cable
cutting ability.