Product Manual
Page 6 of 11
Specific Operation Warnings
⚠WARNING
To prevent serious injury or property damage, read and understand owner's manual before
operating.
Risk of explosion. Do not exceed the MAX working pressure.
Wear the proper protective equipment including ANSI Z87.1 safety goggles.
Do not point the nozzle or blow air at a person's face.
Hold the hose while rewinding.
Bleed gas pressure from system before servicing reel.
Do not open the spring cover.
Ensure reel is securely mounted or fastened before use.
Do not use if parts are damaged.
Not for use by or around children.
Assembly Instructions
1. Install the hose reel on the wall and ceiling at a maximum height of 10 feet above the floor.
2. The reel base has two mounting holes for mounting on a flat surface. The illustration below shows
the correct location of the mounting holes in the base.
3. Using the mounting holes in the base, mount the reel in the desired location. Be sure to use
appropriate hardware and tighten securely.
4. The end of the incoming hose can be connected to a desired supply source.
5. Outlet fittings on a reel hose attach to a desired tool or nozzle. Check the connection for leakage
and check the hose reel for the correct operation by slowly pulling out the hose.