Full Product Manual

2
SAFETY
PORTABLE WELDING TABLE
Lifting And Transporting Table
SAFETY
SAFETY PRECAUTIONS
Do not attempt to use this equipment until you have
thoroughly read all operating and maintenance manuals
supplied with your machine. They include important safety
precautions, operating and maintenance instructions and
parts lists.
FIRE OR EXPLOSION hazard
FALLING EQUIPMENT can injure.
• i. Do not exceed maximum weight of
table. Evenly distribute load on surface.
MOVING PARTS can injure.
• Keep away from moving parts.
• Keep away from pinch points such as
drive rolls.
------------------------------------------------------------------
service this equipment.
WARNING
SETTING UP TABLE
To ensure proper setup of the portable welding table:
• Only use table for recommended
applications.
• ii. Do not stand, sit, or climb on table.
• iii. Do no use table on uneven surface
where it can be tipped over.
• iv. If table is to be used on an incline,
adjust leg height so table top is even.
• v. Keep equipment and parts away from
edges of the table to prevent falling objects.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts such as
output terminals or internal wiring.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves.
WARNING
•
• Insert locking pins in each leg (shipped loose).
• Ensure table is level with all leg locking pins engaged prior to
using.
PORTABLE WELDING TABLE BEST PRACTICES
The following guidelines will ensure proper usage of the portable
welding table:
• Do not exceed maximum weight of table. Evenly distribute
load on surface.
• Do no use table on uneven surface where it can be tipped
over.
• If table is to be used on an incline, adjust leg height so table
top is even.
•
Keep equipment and parts away from edges of the table to
prevent falling objects.
• Inspect table before every use to ensure it has no loose
parts and is in good working condition. Check for loose
bolts, partially engaged legs pins, or any damage.
• Tighten nuts to proper torque.
•
Use the supplied earth grounding bolt to connect the
welding table to a good electrical ground according to
national, state, and local codes.
NOTE: Portable welding table REQUIRES TWO PERSON LIFT.
•
properly secured prior to carrying.
• Remove all items off table surface prior to folding/moving.
• Ensure there is a clear pathway before moving transporting
table.
•
DO NOT drop table.
HOT PARTS can burn.
• Do not touch hot parts bare handed.
• Allow cooling period before working on
equipment.
• To handle hot parts, use proper tools
and/or wear heavy, insulated welding gloves
and clothing to prevent burns.
WARNING