Full Product Manual

B-3
OPERATION
PORTABLE WELDING TABLE
Attach the WORK cable clamp from a welder or plasma cutter to
the table close to where the welding or cutting is to occur. The
clamp.
USING THE TABLE
side windows or slots are to be used for connecting the WORK
FIGURE B.6
The slots on the tabletop can be used for clamping or for cutting
on the table surface without cutting the table itself.
FIGURE B.7
pins, clamps, etc. The solid area in the middle of the table can be
used for welding smaller pieces.
FIGURE B.8
Use the windows on the sides of the table to store clamps.
FIGURE B.5
WORK CLAMP
Gun Cable
CAUTION: Keep equipment or work away from the edges of the
table during use to prevent anything from falling off the table.
FIGURE B.9