Instructions / Assembly

Using Camlocks
1
2
DO NOT OVER TIGHTEN.
NE PAS SERRER EXCESSIVEMENT.
3
4
4
Step 1
Step 3
Step 2
Step 4
Connect the male camlock
as diected in the assembly
inStep 1structionsusing a
scewdriver.
Push the male camlock
into the entry hole.
Insert the female camlock as
shown in the instruction.
Note
ensure that the arrow
on the top of the camlock
points towards the entry hole
for the male camlock.
Turn the female camlock
clockwise with a screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
3
这一步文字确保客人可以看清
按照实际的
安装方式更
改安装流
程，左边呈
现的是无预
埋件的安装
方式
Step 1
Step 2
Connect the male camlock as diect-
ed in the assembly instructions using
a scewdriver.
Push the male camlock into the entry
hole.
Step 3
Step 4
Insert the female camlock as shown
in the instruction.
Note:ensure that the arrow on the top
of the camlock points towards the
entry hole for the male camlock.
Turn the female camlock
clockwise with a screwdriver.
You should feel a click when the
camlock is locked in place.
The joint is now secure.
Using Camlocks
3