Installation Guide

HOW TO: INSTALL THE INTRIGUE
1. Place the top of the Intrigue unit into
your umbrella hole.
2. Install 2 D Cell batteries into the base of
the unit.
3. From the bottom of the table, lift the
base of the unit to attach it to the top.
Match up the holes on the stem of top
with the spring loaded buttons on the
base of the unit.
4. Next install the 1 lb. LP tank and close
the door.
5. Light the intrigue by simply flipping the
switch on the base to the “on” position.
6. Watch the flame come to life!
For complete installation
information, see manual at
outdoorrooms.com
7. To un-install simply press the spring loaded
buttons, lower the base, and remove.