Congratulations! Dear Customer: Welcome to the our family. Thank you for purchasing one of our products. Our goal is to provide you with superior service. If there is anything missing from or wrong with your order, or if you have any questions about using our product, PLEASE contact us. Email: Our team is available 24/7 to address your questions, comments, and concerns. Your satisfaction is our ultimate goal. We want to make everything right so you'll share your positive experience with other shoppers.
1 Q&A 1.How often do I need to clean my ice maker? Depending on how frequently you use Ir, it is recommended that you clean it at least once a week. Failure to clean the machine will cause scale accumulation, which will eventually block the pump and cause the product to stop working properly. 2.How should I clean the machine? His recommended to use lemon water or weak acid vinegar for cleaning. Drain immediately after cleaning, and then clean it with pure water.
| SAFETY PRECAUTIONS When using electrical appliances, basic safety precautions should be followed to A\ reduce the risk of fire, electric shock, and injury to persons or property. Read all the instructions before using any appliance: Use this appliance only for its intended purpose as described in this owners’ manual * This ice-maker must be properly installed in accordance with the installation instructions before it is used. = This unit must be positioned so that the plug is accessible.
| SAFETY PRECAUTIONS A Note: * This appliance must be earthed. Use the proper power source according to the nameplate. Keep all ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruct ton.
| SAFETY PRECAUTIONS A Note: * Do not damage the refrigerant circuit. ® This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. » Children should be supervised to ensure that they do not play with the appliance. * This appliance must be earthed. Use a earthed power supply.
| OPERATION & INSTALLATION MAIN UNIT CONSTRUCTION 1. Top cover 2.Door for ice taking ulcer-making & its water tank assembly: Including ice making evaporator, water tank, water pump and some detecting parts 4 Front panel 5.Operation panel &.4ir outlet: Must keep the air circulate smoothly. Hot air will Blow out when unit running, 7 Water draining port: Normal plugged with the cap. When the water needs to be drained, unplug the cap. And connect the white drain pipe.
| OPERATION & INSTALLATION A Water dividing pipe: with nine little holes, water will flow from these little holes. If no water flows out, it can be disassembled and cleaned. B Evaporator {ice-making module) Lee full detecting board: Use to detect if the inner cabinet is full of ice or not, and to check the ice-harvest process is over or not. D Water tank: E Water supplying pipe: F.Cover board on the right side of the evaporator: G Water level switch installing plate: H.
| OPERATION & INSTALLATION EXPLOSIVE DRAWINGS ed 7 2 for ! EE No. Parts Nome Material Qty.
| OPERATION & INSTALLATION 18 Water circulation pump AC110-120V, 60Hz, Electrical parts 1 13 Cover of the water tank ABS 1 20 Water level detecting switch Daisy, Electrical parts 1 21 Ice—full detecting plate ABS 1 22 Magnetic control switch DC, Electrical parts 4 23 Cover board on the right side of the | ABS 1 evaporator 24 Evaporator and its frame Copper plated with nickle, and ABS frame | 1 25 Water supplying pipe Silicone pipe 1 28 Water dividing pipe, with nine holes | ABS 1 27 Cap of the water dividin
| OPERATION & INSTALLATION UNPACKING YOUR ICE MAKER + Remove the exterior and interior packaging. Check if all the accessories, including the instruction manual, ice scoop, white water inlet pipe, 4 ways to 2 ways water quick connector and the water draining pipe, etc, are present. If any parts are missing, please contact our customer service. + Remove the tape for fixing the door and inner cabinet, ice soap, ete. Roughly clean the inner cabinet & ice scoop with a wet cloth.
| OPERATION & INSTALLATION To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed {at least 20CM free space). Allow at least 50 mm clearance at the back, and 50 mm at the top and sides for proper air circulation. The installation should allow the ice maker to be pulled forward for servicing if necessary. ‘When installing the ice maker under a counter, follow the recommended spacing dimensions as shown above.
| OPERATION & INSTALLATION CLEANING YOUR ICE MAKER BEFORE USING FOR THE FIRST TIME Before using your ice maker, iris strongly recommended to clean it thoroughly. # Open the ice collecting door. ¢ Clean with diluted detergent, warm water and a soft cloth. * Repeatedly clean the water contacting inner parts, you can pull the Water drainpipe of the water tank indicating “IT” in above illustration to drain the cleaned water in the water tank.
| OPERATION & INSTALLATION * Connect the water hose to the water faucet of the water main supply system First, install the supplied water quick-connector to the water faucet by screw thread Second, remove the clipper from the water quick-connector, insert the other end of the water hose into this Buick-connector port completely, then install back the clipper, also this step is completed Note: The water faucet should be supplied by the customer himself.
| OPERATION & INSTALLATION * Arab ice making cycle is around 11-minutes. The ice making time will be changed according to the ambient temperature and the water temperature change. Especially the first ice making cycle, the ice making cycle will be longer because of the high-water temperature in the water tank, but the ice making cycle will not be longer than minute. Adjust the ice thickness. Press -" button on the control panel to adjust the ice thickness.
| OPERATION & INSTALLATION * Automatic self-cleaning program. The default cleaning Hume is 20 minutes. Start the self-cleaning program: After connecting all the water pipes, plug on the main power supply plug, then press “TIMER CLEAN" button on control panel for more than 5 seconds, to enter the self-cleaning program. The symbol @ rotate on the display screen, and the time counts down area displays 20M.
| TIPS & MAINTENANCE PREPARING THE ICE MAKER FOR LONG STORAGE If the ice maker will not be used for a long time, moved to another place, it will be necessary to drain out all of the water in the system. = Allow all the ice cubes to be ejected from the evaporator of ice maker, Turn off the unit, and unplug the power cord. Shut off the water supply at the main water supply. Disconnect the water supply hose from the water inlet valve.
| TIPS & MAINTENANCE NOTICE: Stainless steel models exposed to chlorine gas and moisture, such as In ares with spas or swimming pools, may have some discoloration of stainless steel, Discoloration from chlorine gas is normal. INTERIOR CLEANING For Ice Storage Bin The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the first time and reused after stopping for an extended period of time.
| TIPS & MAINTENANCE ® For the water tank and ice-full detecting plate ein ov: ig Seating plate iar * Also, the water tank and the ice-full detecting plate is very Important to keep your ice cube hygienic. Pu ta mixture of neutral cleaner & water into a clean water jet, and then spray to all the inner surface of tank & the ice detecting plate. Wipe these surfaces with a clean cloth. And then, spray the surfaces with clean water, wiping with a dry clean cloth.
| TIPS & MAINTENANCE ® Check to be sure that the water drainpipe of the water tank has been installed properly in the slot of the tank wall Then pour one cup of Nickel-Safe Ie Maker Cleaning Solution into the water tank. Wait about for 5 minutes. Turn on the power to the ice maker, and press "TIMER CLEAN" button on the control panel for more than 5 seconds to enter the self-cleaning program. As explained above, the water pump runs for 8 minutes and stops for 3 minutes, completes one cycle, and then another.
| TIPS & MAINTENANCE * SEMI-MONTHLY CLEANING The ive shovel, ice bin, water tank, the vie-full detecting plate and the surface of the evaporator are to be cleaned twice a month according to the interior cleaning program. * SEMI-ANNUAL CLEANING All the components & surfaces exposed to water or ice cubes, like ice storage bin, water tank, door, evaporator, water pump, silicone tube, water dividing pipe, etc. should be cleaned hy Using Nu-Glucagon Nickle Safe Ice-machine Cleaner every 6 months.
| SPECIFICATIONS ELECTRICAL DIAGRAM Start Relay Over iced Protector Ta (Me “TAC Water Pump Ea Vale for lee-harvest { Joo wae vas DC Fan Motor] Aa (HT ~~ WATER LEVEL DETECTING SWITCH TL = SENSOR FOR AMBIENT TEMP —% SENSOR FOR ICE © FULL DETECTING WIRING DIAGRAM NORMAL SOUNDS Your new ice maker may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor, walls and cabinets can male the sounds seem louder than they actually are.
| WARRANTY We offer a limited 1-year warranty [“warranty period”) on all of sur products purchased new and unused from the company, with an original proof of purchase and where a defect has arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period.
| TROUBLESHOOTING-SUPPORT Problem Possible Cause Solution " # " indicator is on. Ho water supply. Check the main water supply pressures or check the water supply hose is blocked or not, adding the water pressure or cleaning the hose necessary. Floating ball of the water level Clean the water tank and the water level water dividing pipe. detecting switch Is blocked, = . can't be raised up. detecting switch. Water flows out from the Place the unit on the level position, not on water tank. the slope.
