Product Literature

Applications: sand separator for well applications
Standard Characteristics:
• Filter housing material of construction: Carbon Steel ST37.2
• Pre-treatment: sand blasting up to Sa 2.5 grade
• Exterior & Interior coating: electrostatic oven baked polyester-epoxy powder coating with a thickness of 150-200 micron
• Connections: VIC, Male Threaded and Flange
• Maximum recommended working pressure: 10 bars (145 psi).
• Inlet is tangential to the body
• Equipped with anti- vacuum valve
• Conical rubber protection or expendable connection on the joint between hydrocyclone and the sedimentation tank
Operation:
Water enters the hydrocyclone via the tangential inlet which creates a spiral flow along the walls of the filter. The centrifugal force
separates the waste and sand particles and pushes them towards the walls of the sand separator. Those particles gravitate downwards
and into the sedimentation tank, while clean water moves upwards and exits through the top outlet. For the sand separator to operate
correctly, the lead loss must remain between 2-5m. The separation efficiency is not affected by the accumulation of dirt in the
sedimentation tank. The sedimentation tank is drained by opening a flush valve for a few seconds manually or automatically by timer.
*Optional on request
V.10.2019
Series F700
Hydrocyclone / Sand Separator
The Toro Company | Ag Business | 1588 N. Marshall Avenue, El Cajon, CA 92020-1523, USA | Tel: + 1 [phone] or + 1 [phone] | toro.com/agriculture
Model
ØD1
(in)
In/out
ØD
(in)
H
(mm) (in)
H1
(mm) (in)
Shipping
Weight
(kg) (lb)
Packaging Vol.
LxWxH
(m) (ft)
Flow rate
(m
3
/h) (GPM)
Sedimentation
tank
(liter) (gal)
F710 3 ¾
380
14.9
475
18.7
8.3
18
0.31x0.31x0.19
1.02x1.02x.0.62 2.4 – 4 10.6 – 17.2
1.5 0.4
F720 4 1
460
18.1
600
23.6
10.1
22
0.54x0.28x0.22
1.77x0.92x0.72 3.5 – 6 15.4 – 26.4
1.5 0.4
F730 6 1.5
594
23.4
740
29.1
15.5
34
0.55x0.32x0.28
1.80x1.05x0.92 6.5 – 10 28.6 – 44
2.5 0.7
F740 8 2
755
29.7
900
35.4
23.4 52 0.63x0.42x0.30 2.07x1.38x0.94 11 – 19 48.4 – 83.6
5
1.3
F750VLF
8 3
765
30.1
930
36.6
32.5
72
0.67x0.55x0.28
2.20x1.80x0.92 20 – 35 88 – 154
10 2.6
F750 8 3
765
30.1
930
36.6
32.5
72 0.67x0.55x0.28 2.20x1.80x0.92 29 – 45
127.6
–
198
5 (10*) 1.3 (2.6*)
F755 12 4x3
1285
50.6
1550
61.0
75.0
165
1.37x0.77x0.22
4.49x2.53x0.72 45 – 73 198 – 321
30 8
F760 16 4
1495
58.8
1765
69.5
97.5
215
1.26x0.77x0.26
4.13x2.53x0.85 60 – 93 264 – 409
60 16
F770 20 6
1671
65.8
1996
78.6
187.0
412
1.40x1.20x1.00
4.60x3.94x3.28 93 – 155 409 – 682
150 40
F775 24 6
1940
76.4
2300
90.5
230.0
507
1.70x0.90x1.00 ciclón
1.30x0.77x0.80 tanque
5.6x3.0x3.0 ciclón
4.3x2.5x2.6 tanque
145
–
225
638 – 990
150 (220*)
40 (58*)
F780 30 8
2492
98.1
2897
114.0
328.0
723
2.10x0.95x1.15 ciclón
1.40x0.77x1.00 tanque
6.9x3.1x3.8 ciclón
4.6x2.5x3.3 tanque
200
-
330
880 - 1452
300 80