Instructions / Assembly

STEP 1: LAYOUT PARTS
On a table lay out all parts as shown in the exploded view above.
STEP 2: ATTACH CURVED ARMS TO THE RECTANGULAR BOOKSHELF FRAME
TIP!
It is easiest to attach the curved arms when you insert the Button head Screw (18A) from the outside and then
the Cap Nut (18B) from the inside.
How To Assemble Bookshelf Rack
TIP! SAVE TIME AND HASSLE.
PLEASE READ ENTIRE INSTRUCTIONS
BEFORE BEGINNING ASSEMBLY.
MISSING A PART?
Please call our TOLL FREE
SERVICE CENTER
1 [phone]
19C
27A
30A
30B
9A
18A
8B
22
25B
25A
19C
27A
30B
30A
26A
ITEM NO. DESCRIPTION QTY.
8B Grid shelf 1
9A Bookshelf body 1
18A/B Button head screw & Cap Nut 4 Sets
19C Screw 1/4 x 20 x 2" 2
22
Bookshelf curved arm (long) 2
25A
Pot hook straight 4
25B Pot hook angled 4
26A Hex key 2
27A Toggle anchor 2
30A Wall screw 2
30B Wall sleeves/anchors 2
How to Attach Your Pot Rack to the Wall
TOOLS NEEDED FOR INSTALLATION:
Provided: Installation hardware (anchors, bolts, wall screws and red sleeves)
You will need: level, tape measure, pencil, and an electric drill
STEP 1: LOCATION
Decide where you want to place your pot rack. Consider the height of the wall where the pot rack will hang, keeping in mind
how far below the rack your pots and utensils will hang, plus how high above your head you can still easily reach cookbooks,
etc. stored on the grid.
On the wall, mark the four points where the top of rack arms and back bar will attach. Then tap a
small nail through each mark to be certain a joist is not in the way. NOTE: because your pot rack includes toggle anchors, you
DO NOT need to locate and bolt to studs. You can use the Toggler anchors and install your rack directly onto drywall.
See more information under STEP 2 below.
STEP 2: INSTALL DRYWALL ANCHORS
TOGGLER® drywall toggles eliminate the need to bolt your pot rack to a stud. The steel anchors are very strong and when
installed in drywall each drywall anchor holds about 200 lbs. Two anchors hold about 400 lbs., many times the weight you will
likely hang from your pot rack.
See Back of this Booklet for Toggle Instructions.
INSTALL IN WOOD
If you need to install one or both sides of your rack in wood, use all of the wall screws (30A) included without
any plastic anchors.
CLEANING
Your pot rack has a durable powder coat finish designed to provide years of protection. Cleaning with a damp cloth.
PAINTABLE Want a different color? We recommend Rustoleum
“Hammered” colors for their metal-like finishes.
Consult a paint retailer for guidance
Dry thoroughly after cleaning.
HABITAT
products
®
Page 1