Use and Care Manual

1
CONTENT
1. Components
2. Operation
3. For your safety
4. Cleaning and storage
5. Specifications
6. Grounding instructions
7. Warranty
FRANÇAIS
1. COMPONENTS
1. Please empty the packing box thoroughly and make sure that all the parts are present and that there are no
missing parts.
2. DO NOT PLUG THE UNIT IN UNTIL THE UNIT IS COMPLETELY ASSEMBLED AND MAKE SURE THERE IS NO
DAMAGE to the unit and power cord.
3. If you must use an extension cord, the cord should be at least NO .14 AWG and rated for no less than
1875 W.
4. For indoor and outdoor Use
IF THERE IS ANY DAMAGE OR MISSING PARTS, PLEASE CONTACT ENERG+ CUSTOMER SERVICE AT 866-967-
7333 ext. 227 (8:30 AM to 5:00PM Eastern time) or email us at: [e-mail]
2. OPERATION
Press the power button on the Heater to activate or deactivate it.
Make sure the heater is not connected to a wall outlet before placing it where it will be used.