SDS

IDH number: 701942 Product name: FAST CURE MIXER CUPS 1 OZ
Page 4 of 5
13. DISPOSAL CONSIDERATIONS
Information provided is for unused product only.
Recommended method of disposal:
Follow all local, state, federal and provincial regulations for disposal.
Hazardous waste number:
Not a RCRA hazardous waste.
14. TRANSPORT INFORMATION
U.S. Department of Transportation Ground (49 CFR)
Proper shipping name:
Not regulated
Hazard class or division:
None
Identification number:
None
Packing group:
None
International Air Transportation (ICAO/IATA)
Proper shipping name:
Environmentally hazardous substance, liquid, n.o.s. (epoxy resin)
Hazard class or division:
9
Identification number:
UN 3082
Packing group:
III
Water Transportation (IMO/IMDG)
Proper shipping name:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (epoxy resin)
Hazard class or division:
9
Identification number:
UN 3082
Packing group:
III
Marine pollutant:
epoxy resin
15. REGULATORY INFORMATION
United States Regulatory Information
TSCA 8 (b) Inventory Status:
All components are listed or are exempt from listing on the Toxic Substances Control Act
Inventory.
TSCA 12(b) Export Notification:
None above reporting de minimus
CERCLA/SARA Section 302 EHS:
None above reporting de minimus
CERCLA/SARA Section 311/312:
Immediate Health, Delayed Health
CERCLA/SARA 313:
None above reporting de minimus
California Proposition 65:
This product contains a chemical known in the State of California to cause cancer.
Canada Regulatory Information
CEPA DSL/NDSL Status:
Contains one or more components listed on the Non-Domestic Substances List. All other
components are listed on or are exempt from listing on the Domestic Substances List.
Components listed on the NDSL must be tracked by all Canadian Importers of Record as
required by Environment Canada. They may be imported into Canada in limited quantities.
Please contact Regulatory Affairs for additional details.
WHMIS hazard class:
D.2.A, D.2.B
16. OTHER INFORMATION
This material safety data sheet contains changes from the previous version in sections: New Material Safety Data Sheet
format.
Prepared by: Gary Pierson, Manager, Regulatory Affairs