SDS

IDH number: 701942 Product name: FAST CURE MIXER CUPS 1 OZ
Page 3 of 5
Respiratory protection:
Use a NIOSH approved air-purifying respirator if the potential to exceed
established exposure limits exists.
Eye/face protection:
Safety goggles or safety glasses with side shields.
Skin protection:
Chemical resistant, impermeable gloves.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
Paste
Color:
White
Odor:
Mild
Odor threshold:
Not available
pH:
Not applicable
Vapor pressure:
Negligible
Boiling point/range:
> 149 °C (> 300.2 °F)
Melting point/ range:
Not available
Specific gravity:
1.68
Vapor density:
Not available
Flash point:
> 93 °C (> 199.4 °F) Tagliabue closed cup
Flammable/Explosive limits - lower:
Not available
Flammable/Explosive limits - upper:
Not available
Autoignition temperature:
Not available
Evaporation rate:
Not available
Solubility in water:
Slight
Partition coefficient (n-octanol/water):
Not available
VOC content:
0.47 %; 7.9 g/l
0.04 % (value for resin and hardener together)
10. STABILITY AND REACTIVITY
Stability:
Stable
Hazardous reactions:
Will not occur.
Hazardous decomposition products:
None
Incompatible materials:
Strong bases. Strong oxidizing agents. Strong acids.
Conditions to avoid:
Excessive heat. Store away from incompatible materials.
11. TOXICOLOGICAL INFORMATION
Hazardous components NTP Carcinogen IARC Carcinogen
OSHA Carcinogen
(Specifically Regulated)
Epichlorohydrin-4,4'-isopropylidene
diphenol resin
No No No
Aluminium hydroxide No No No
Titanium dioxide No Group 2B No
Hazardous components Health Effects/Target Organs
Epichlorohydrin-4,4'-isopropylidene diphenol resin Allergen, Irritant
Aluminium hydroxide Irritant, Lung, Respiratory
Titanium dioxide Irritant, Respiratory, Some evidence of carcinogenicity
12. ECOLOGICAL INFORMATION
Ecological information:
Not available