Installation Guide

After cutting the Knee Wall Cap to size & the new cut edge needs
to be nished. Cut the additional 1” x 60” piece of slate provided to
size, and apply the new strip to curb cap with the Locitie 5570.
Follow the previous steps with regards to cutting and installing
the SoterraSlate panels for the lower inside and outside walls.
After installing the side wall, measure the front outside wall and
the top to provide the proper measurements for the Soterra 6" x
60" x 1” thick Knee Wall Cap piece(s). (see picture 1)
When nalizing the measurements, be sure to account for any
overhang. The standard overhang is ½" along all exposed edges.
(see picture 2)
How to Cut & Install a Soterra Knee Wall cap:
1
2
3
1
2
The Soterra 6" x 60" Knee
Wall Cap comes with (3)
nished edges and (1)
additional 1” x 60” piece.
Use the circular saw or tile
saw to cut the cap to desired
dimensions.
3
Extras—Installing Knee Wall
WWW.SOTERRADIY.COM 24