Installation Guide

Where the trim butts together, apply a small amount of color co-
ordinating silicone caulk to help hide the seam. Use just enough
to cover the surface and ll the seam (see picture 5).
Use a strip of masking tape to hold the trim in place as the 5570
cures.
When stacking the trims on top of each other or on top of the
panel, the masking tape may not be needed.
Make sure trims are ush and properly aligned prior to 5570 cur-
ing (see picture 6).
How to Install SoterraSlate Bullnose & Ogee Trim (continued):
5
6
7
6
5
Trim Lessons—Installing Trim
WWW.SOTERRADIY.COM 23