Installation Guide

When using the recommended
straight edge, fasten the straight edge
down to the table with the provided C
clamps to secure the slate panel so
that it does not shift during your cut.
The recommended straight edge can
be used as a 49” guide or 98” guide.
How to Cut Soterra Slate Panels:
5
5
6
Pleasenote,therecommended4”
handheldwetsawcanbeused
whilecuttingthepanels(see
picture#5),but4”bladewillNOT
passthruthethickerOgee&Bull-
nosetrims.etilesawinpicture
6canbeusedforcuttingstraight
linesonthepanelsandcanalsocut
theOgee&Bullnosetrim.
6
Panel Lessons—Cutting Thin Panels
WWW.SOTERRADIY.COM 11