Third Party Verification Claim

Page 45 of 129 Report No.: JAT2209271146SR-1
UL 859
Clause
Requirement + Test
Result - Remark
Verdict
Room 303, Building 1, No.316, Renzhou Road, Shatian Town, Dongguan City, Guangdong Province, China.
Tel: 0769-81710286 E-mail: wangzhao@junantest.com Website: www.junantest.com
31.1
A capacitor provided as a part of a capacitor motor
and a capacitor connected across the line, such as
a capacitor for radio-interference elimination or
power-factor correction, shall be housed within an
enclosure or container that shall protect the plates
against mechanical damage and prevent the
emission of flame or molten material resulting from
malfunction of the capacitor. The container shall
be of metal providing strength and protection not
less than that of uncoated steel having a thickness
of
0.020 inch (0.51 mm). Sheet metal having a
thickness less than 0.026 inch (0.66 mm) shall not
be used. The motor starting or running capacitor
shall comply with the Standard for Capacitors, UL
810. The across the line capacitor shall comply
with the applicable requirements in the Standard
for Capacitors and Suppressors for Radio- and
Television-Type Appliances, UL 1414
N/A
Exception: The individual container of a capacitor
may be of sheet metal less than
0.020 inch thick or may be of material other than
metal if the capacitor is mounted in an enclosure
that houses other parts of the appliance and
provided that such housing is acceptable for the
enclosure of live parts
N/A
31.2
If a capacitor that is not a part of a capacitor motor
or a capacitor-start motor is connected in an
appliance that is intended to be automatically or
remotely-controlled so that malfunction or
breakdown of the capacitor would result in a risk of
fire, electric shock, or injury to persons, thermal or
overcurrent protection shall be provided in the
appliance to reduce such a risk
N/A
31.3
Capacitors, connected line-to-line or line-to-
ground, shall comply with the requirements in the
Standard for Capacitors and Suppressors for
Radio- and Television-Type Appliances, UL 1414;
or the Standard for Fixed Capacitors for Use in
Electronic Equipment Part 14: Sectional
Specification: Fixed Capacitors for
Electromagnetic Interference Suppression and
Connection to the Supply Mains, UL60384-14. A
capacitor connected from one side of the line to
the frame or enclosure of an appliance shall have
a capacitance rating of not more than 0.10
µF
N/A
31.4
The voltage rating of a capacitor other than a
motor-starting or motor-running capacitor shall
equal or exceed the maximum steady-state
potential to which the capacitor is subjected during
operation of the unit at the rated voltage
N/A