Third Party Verification Claim

Page 119 of 129 Report No.: JAT2209271146SR-1
UL 859
Clause
Requirement + Test
Result - Remark
Verdict
Room 303, Building 1, No.316, Renzhou Road, Shatian Town, Dongguan City, Guangdong Province, China.
Tel: [phone] E-mail: [e-mail] Website: www.junantest.com
83.3
Cautionary markings and instructions shall be
permanent and legible and shall be located on a
part that cannot be removed without impairing the
operation of the appliance
P
83.4
Cautionary markings and instructions intended to
instruct the operator shall be legible and clearly
visible to the operator in the intended use of the
appliance. Other such markings for servicing
instructions should be legible and clearly visible
when such servicing is being accomplished.
Markings intended to reduce the risk of injury to
persons shall be prefixed by the word CAUTION in
letters no less than 3/32 inch (2.4 mm) in height
N/A
83.5
A marking that is required to be permanent shall
be:
P
Molded, die-stamped, paint-stenciled, stamped, or
etched on metal
P
A pressure-sensitive label secured by adhesive
that meets the requirements for the particular
application (see 63.1 – 63.7). Ordinary usage,
handling and storage of the appliance is to be
considered in the determination of the
permanence of the marking
P
84
Operating Instructions`
P
84.1
The manufacturer shall provide operating
instructions with the appliance that shall include
the following. These instructions shall be
contained in a separate section or sections and
immediately follow the instructions required in 74.6
P
Information regarding potential risk of fire, electric
shock, or injury to persons that may exist due to
use of the appliance. The instructions shall caution
the user to keep the appliance out of the reach of
children and to locate the appliance where it would
not be likely to be upset
P
Sufficient information regarding the potential risk of
electric shock due to overfilling or cleaning of the
appliance without disconnecting the power supply
cord
P
Instructions regarding recommendations for
cleaning the appliance including any need for
disassembly (and reassembly) and any need for
the use of additives.
P
85
Scope
P
85.1
These requirements cover cord-connected hair
dryers rated 250 volts or less that consist of two
non-detachable units– a hand unit and a wall unit
with a length of flexible cord between the units.
The hand unit provides the hair drying function and
is supported by the user’s hand during intended
use. The wall unit is intended for hanging on a
wall and has means for holding or supporting the
hand unit when not in use
P