Third Party Verification Claim

Page 104 of 129 Report No.: JAT2209271146SR-1
UL 859
Clause
Requirement + Test
Result - Remark
Verdict
Room 303, Building 1, No.316, Renzhou Road, Shatian Town, Dongguan City, Guangdong Province, China.
Tel: [phone] E-mail: [e-mail] Website: www.junantest.com
72.4.4
The warning tag shall be permanently affixed to
the power supply cord, no more than 6 inches
(152.4 mm) from the attachment plug and shall be
made of substantial material (cardboard, cloth,
plastic, or the equivalent) to provide mechanical
strength and to prevent easy removal. All exposed
surfaces shall have a
clear plastic overlay, or the equivalent, to protect
the markings. The tag shall comply with the
requirements specified in the Test for Permanence
of Cord Tag for Hand-Supported Hair-Drying
Appliances, Section 58. The tag shall be either of
the following forms
N/A
A flag-type tag having a hole to permit securement
to the power supply cord by a plastic strap or
equivalent means. The strap shall not be
removable without cutting
N/A
A flag-type tag with an adhesive back. The tag is
to be wrapped tightly once around and is to
adhere to the power supply cord. The ends of the
tag are to adhere to each other and project as a
flag. The required markings are to be positioned
on the projecting flag portion of the tag
N/A
72.5
Permanently-installed wall-mounted hair dryers
N/A
72.5.1
A permanently-installed wall-mounted hair dryer
shall be permanently marked either on the wall
unit or on the hand unit where readily visible after
installation in letters having a color contrasting with
the color of the background:
DANGER – ELECTROCUTION POSSIBLE IF
USED OR DROPPED IN TUB. TURN UNIT
OFF AFTER USING . The height of the letters
in the word DANGER shall be no less than 1/8
inch (3.2 mm) and the height of the remaining
letters shall be no less than 1/16 inch (1.6 mm).
N/A
Exception No. 1: The marking need not be in
contrasting colors if the word
DANGER is 1/8 inch in height-or at least
7/64 inch (2.8 mm) in height and underlined – and
the remaining text is at least 7/64 inch in height
N/A
72.5.2
A permanently-installed wall-mounted hair dryer
shall be provided with a marking that is readily
visible after installation on
N/A
The wall uni
N/A
The hand unit, or
N/A
A tag that is permanently attached to the cord of
the hand unit. The tag material and means of
attachment to the hand unit shall be evaluated
under the requirements specified in the Test for
Permanence of Cord Tag for Hand-Supported
Hair-Drying Appliances, Section 58
N/A