Third Party Verification Claim
Page 103 of 129 Report No.: JAT2209271146SR-1
UL 859
Clause
Requirement + Test
Result - Remark
Verdict
Room 303, Building 1, No.316, Renzhou Road, Shatian Town, Dongguan City, Guangdong Province, China.
Tel: 0769-81710286 E-mail: wangzhao@junantest.com Website: www.junantest.com
72.4.1
A hand-supported hair-drying appliance, such as a
hair dryer, blower-styler, styler-dryer, heated air
comb, curling iron-dryer combination, or similar
appliance (with or without attachments) shall be
permanently marked where readily visible in
letters having a color contrasting with the color of
the background: DANGER
– ELECTROCUTION POSSIBLE IF USED OR
DROPPED IN TUB. UNPLUG AFTER USING
. The height of the letters in the word DANGER
shall be no less than 1/8 inch (3.2 mm) and the
height of the remaining letters shall be no less
than 1/16 inch (1.6 mm).
N/A
Exception No. 1: The marking need not be in
contrasting colors if the word DANGER is 1/8
inch in height
– or at least 7/64 inch (2.8 mm) in height and
underlined – and the remaining text is at least 7/64
inch in height
N/A
72.4.2
An appliance of the type described in 72.4.1 shall
be provided with a tag that is permanently
attached to the power supply cord. The tag
material and means of attachment to the power
supply cord shall be judged under the
requirements specified in the Test for Permanence
of Cord Tag for Hand-Supported Hair-Drying
Appliances, Section 58. The tag shall contain the
following warning instructions
N/A
72.4.3
The reverse side of the warning tag shall provide
the pictorial warning illustrated in Figure 72.1, or
the equivalent. The illustration shall consist of a
black outline on a contrasting color background,
with the slash mark in red. The height of the
illustration shall be no less than 1 inch (25.4 mm)
and the width shall be no less than 2 inches (50.8
mm). The heading UNPLUG
IT shall be in red letters at least 3/16 inch (4.8
mm) in height. The headings DO NOT
REMOVE THIS TAG! And WARN
CHILDREN OF THE RISK OF DEATH BY
ELECTRIC SHOCK! Shall be in black letters
no less than 3/16 inch in height. All lettering shall
be in block letters
N/A