Third Party Verification Claim

Page 10 of 129 Report No.: JAT2209271146SR-1
UL 859
Clause
Requirement + Test
Result - Remark
Verdict
Room 303, Building 1, No.316, Renzhou Road, Shatian Town, Dongguan City, Guangdong Province, China.
Tel: [phone] E-mail: [e-mail] Website: www.junantest.com
If the wax is capable of being heated above 75°C
(167°F) for quick melting, the reservoir in which the
wax is so heated shall be provided with a
nonremovable, self-closing lid or cover
N/A
If the wax is capable of being heated above 75°C
(167°F) for quick melting, the reservoir in which the
wax is so heated shall be provided with a
nonremovable, self-closing lid or cover
N/A
9.3.4
With reference to 9.3.3(a), a nonremovable cover
is one which requires special tools (tools not
available to other than service personnel) for
removal. A self-closing cover is a cover
that returns to its fully closed position without any
action on the part of the user other than releasing
it from any opened position while the appliance is
supported by a flat, horizontal surface
N/A
9.3.5
In accordance with 46.9.5 and 76.8, if the
malfunction of a temperature-regulating control
increases the application temperature of the wax
above 75°C (167°F), visible means, such as an
indicator light, shall be provided to inform the user
of an overheat condition
N/A
Exception: A visible overheat condition indicator is
not required if a thermal cutoff or a trip-free
manual-reset thermostat operates upon short-
circuiting of the temperature-regulating control.
The temperatures attained by the wax, and
surfaces of the appliance that are handled or
contacted by the user during intended use, at the
time the thermal cutoff or thermostat opens shall
not present a risk of burn as determined by an
appropriate investigation. The investigation shall
include consideration of the length of time that
temperatures remain above the specified limits,
the thermal inertia of the materials involved, and
similar factors
N/A
10
Mechanical Assembly
P
10.1
An appliance that involves a motor or other
vibrating part shall be assembled such that the
appliance will not be affected adversely by the
vibration. Brush caps shall be tightly threaded or
otherwise constructed to prevent loosening
N/A
10.2
A switch (other than a through-cord switch),
lampholder, receptacle, motor-attachment plug, or
similar component shall be mounted securely and
shall be prevented from turning
N/A
Exception No. 1: Turn-prevention means for a
switch are not required, when all the following
conditions are met
The switch is of the plunger or other type that does
not tend to rotate when operated (a toggle switch
is subject to forces that tend to rotate the switch
during intended operation of the switch)
N/A