Installation Guide

ManualsBrandsUnbranded ManualsFittings1-1/4 in. Form N Fit Flexible P-Trap

INSTRUCCIONES DE INSTALACIÓN

1. Coloca la tuerca (A) y la arandela (B) en el tubo de conexión

2. Fija el codo en J (D) en el tubo de conexión y aprieta la tuerca (A)

3. Coloca la tuerca (E) en el tubo de pared (F), conecta al codo en J (D) y aprieta

4. Fija el tubo de pared (F) a la conexión en la pared

5. Aprieta todas las tuercas. VERIFICA QUE NO HAYA FILTRACIONES

FORM-N-FIT P-TRAP Instruction Sheet

SIFÓN EN P FORM-N-FIT Hoja de instrucciones

©2021 OateySCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range of product properties but should not be

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.321.9532 | Oatey.com

HDC9689 06/21

INSTALLATION INSTRUCTIONS

1. Place nut (A) and washer (B) on tailpiece

2. Attach J-bend (D) to tailpiece and tighten nut (A)

3. Place nut (E) on wall tube (F), attach to J-bend (D) and tighten

4. Attach wall tube (F) to wall connect

5. Tighten all nuts. CHECK FOR LEAKS