User manual

40
Instructions
Istruzioni
www.philips.com/support
WARNING SIGNALS (YELLOW COLOUR)
SEGNALI DI AVVISO (GIALLO)
EN
The machine is warming up. The machine is performing
a rinse cycle. Wait until this
has been completed.
The “INTENZA+” water  lter needs to be replaced. The brew group is being reset
due to machine reset.
IT
Macchina in fase di riscal-
damento.
La macchina sta eseguendo
un ciclo di risciacquo. Atten-
dere  no al termine.
È necessario sostituire il  ltro acqua “INTENZA+”. Gruppo ca è in fase di ri-
pristino in seguito a reset
macchina.
EN
Re ll the co ee bean hop-
per and restart the brewing
cycle.
Prime the circuit. You need to descale the machine.
See descaling chapter for further guidance.
Not descaling your machine will ultimately make it stop working properly. In this
case repair is NOT covered under your warranty!
IT
Riempire il contenitore ca è
in grani e riavviare il ciclo di
erogazione.
Caricare il circuito. È necessario eseguire la decalci cazione della macchina. Vedere il capitolo dedicato alla
decalci cazione per ulteriori indicazioni.
Se non viene eseguita la decalci cazione, la macchina smetterà di funzionare
correttamente. Il malfunzionamento NON è coperto da garanzia!