Certifications 2

TEST REPORT
Report No.
：
PNS21033012 02021
Page 8 of 14
Address: Lianding Testing Building, No.18 Center Road of Yayuan Industrial Zone, Nancheng District, Dongguan, Guangdong, China.
Tel：[phone]Email：[e-mail]：//www.gdutl.com
9. Physical and chemical properties (
物理和化学特性
)
外观
: 棱柱形
Appearance: Prismatic shape
报告编号：
PNS21033012 02001
Ref. No.: PNS21033012 02001
气味
：泄漏时，有醚的气味。
Odour: If leaking, smells of medical ether.
酸碱度
：不适用。
pH: Not applicable as supplied.
燃点
：除单个电芯暴露试验外其他不适用。
Flash Point: Not applicable unless individual components exposed.
可燃性
：除单个电芯暴露试验外其他不适用。
Flammability: Not applicable unless individual components exposed.
相对密度
：除单个电芯暴露试验外其他不适用。
Relative density: Not applicable unless individual components exposed.
溶解性（水溶性）
：除单个电芯暴露试验外其他不适用。
Solubility (water): Not applicable unless individual components exposed.
溶解性（其他）
：除单个电芯暴露试验外其他不适用。
Solubility (other): Not applicable unless individual components exposed.
10. Stability and reactivity (
稳定性和反应活性
)
稳定性
：产品在第7节所述的条件下稳定。
Stability: Product is stable under conditions described in Section 7.
应避免的条件
：加热70°C以上或焚烧、变形、毁坏、粉碎、拆卸、过充电、短路。
长时间暴露在潮湿的条件下。
Conditions to avoid: Heat above 70°C or incinerate. Deform. Mutilate. Crush. Disassemble. Overcharge.
Short circuit. Expose over a long period to humid conditions.
应避免的材料：
氧化剂，碱，水。
Materials to avoid: Oxidising agents, alkalis, water.
危险分解物：
有毒烟雾，并可能形成过氧化物。
Hazardous Decomposition Products: Toxic Fumes, and may form peroxides.
聚合危害：
不适用
Hazardous Polymerization: N/A.
如果发生泄露，避免与强氧化剂，无机酸，强碱，卤代烃接触。
If leaked, forbidden to contact with strong oxidizers, mineral acids, strong alkalies, halogenated hydrocarbons.