Data Sheet

2
Rev. 2/22
The Groundsmaster 4100-D & 4110-D are manufactured
in Tomah, WI ISO 9002 Certified Plant.
Groundsmaster
®
4100-D/4110-D Specifications
*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
GROUNDSMASTER 4100-D, MODEL 30608 GROUNDSMASTER 4110-D, MODEL 30644
ENGINE
Yanmar® 4-cylinder, liquid-cooled, turbo-charged diesel. 127 cu. in. (2.1 liter) displacement. Engine rated at 55 hp (41 kW) net and 125 ft.-lbs. (169 Nm) torque at
2,000 rpm. 8 quart (7.6 liter) oil capacity. EPA Tier IV Final Compliant.
AIR CLEANER
Dry, replaceable primary and safety elements.
RADIATOR
Rear-mount, cross-flow, 6.3 fins per inch, 9 quart (8.5 liter) capacity.
FUEL CAPACITY
21 gallons (79.5 liters) diesel fuel. Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petroleum blend)
TRACTION DRIVE
Parallel hydrostatic, closed loop system with full-time 4WD. Forward/reverse in low (mow) and high (transport) range with full-time, automatic traction assist (forward
only) optional on Groundsmaster 4100-D models. Variable displacement piston pump with electronic servo control powers dual speed displacement piston motor drive
into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed.
HYDRAULICS/COOLING
8.75 gallon (33.1 liter) capacity with 10 micron remote spin-on filter. Single pass cooler, 6.3 fins per inch, SmartCool® variable speed radiator cooling fan with
automatic (based on coolant and oil temps) and manual reversing capabilities.
DIAGNOSTICS
Diagnostic pressure test ports: forward and reverse traction, left, center and right decks, reverse 4WD, lift, steering, charge and deck counterbalance circuits.
GROUND SPEED
Transport: 0-16.2 mph (0-26.1 km/h) forward, 0-8.1 mph (0-13 km/h) reverse. Mow: 0-8.3 mph (0-13.4 km/h) forward, 0-4 mph (0-6.4 km/h) reverse.
TIRES
Front: 26 x 12-12, 6-ply tubeless Multi-Trac. Rear: 20 x 10-10, 6-ply tubeless Multi-Trac.
MAIN FRAME
All welded formed-steel frame with integral tie-down anchors.
BRAKES
Mechanically actuated, internal wet disc brakes on input to each planetary drive. Individual foot-operated steering brake control of left and right wheel. Lock pedals
together and latch to engage parking brake.
SEAT
4-way adjustable, right armrest travels with seat and suspension.
STEERING
Power steering with dedicated power source. Steering wheel tilts to desired operator position. Uncut circle: 0" diameter.
INSTRUMENTATION
InfoCenter™:Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, intake
temperature, low oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage.
CONTROLS
Tilt steering, ignition switch, throttle switch, foot-operated traction pedal, lockable individual brake pedals, parking brake lock, mow/transport speed selector switch,
3, two position switches for individual deck lift/lower, counterbalance adjustment, tow valves, cup holder, toolbox, radio holder, fan switch and 12-volt power outlet.
CRUISE CONTROL
Standard
ELECTRICAL
12-volt, 690 cold cranking amps battery, 80 amp alternator. Overload protection with automotive type fuses.
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat while moving or deck is engaged, traction and/or deck
stops, InfoCenter alarms and gives message. Mowing only permitted in low range. Traction not allowed if parking brake engaged and pedal moved out of neutral,
InfoCenter alarms and gives message. Deck transport latches.
GROUND CLEARANCE
6.5" (16.5 cm)
OVERALL
DIMENSIONS
Height Length Width Transport Width Wheelbase
85.3" (216.7 cm) w/ ROPS up 144" (366 cm) 127" (323 cm) 71" (180 cm) 55.5" (140 cm)
93.3” (237 cm) w/ cab w/ decks down w/ decks down @ 2" (5 cm) HOC
WEIGHT
4237 lbs. (1922 kg) w/ full fluids (GM4100-D). 4890 lbs. (2218 kg) w/ full fluids (GM4110-D).
SAFETY CAB (4110)
MODEL 30644: ROPS certified cab with heat, AC and the following standard features: climate system pressurized cab, heavy-duty pantograph front windshield wiper
and washer, front windshield has 38” of visibility, interior mirror, fold away exterior side mirrors, molded front fenders, right and left doors and rear window have
tinted (50%) glass, front and rear windows open, quick release window latches act as emergency exit, rubber sound isolator cab mounts and upholstered interior
panels and headliner, textured neoprene floor mat, interior dome light.
SAFETY
Complies with American National Standards Institute (ANSI B71.4-2012) and applicable ISO EN 5395 (CE) standards (machine directive 89/392, 91/368, 93/44, 84/538,
89/336) requirements; Optional lights. Meets ANSI/ASAE 5279.12 (Lighting and Marking of Agricultural Equipment on Highways). Foldable ROPS, ISO 21299 certified.
WARRANTY
Two-year limited warranty. Refer to operator’s manual for further details.
ACCESSORIES
Work light, LED road lights consisting of dual taillights, dual headlights, slow moving vehicle sign, turn signal, flasher and lights, sunshade, beacon, slope sensor
CUTTING DECK
WIDTH OF CUT
Overall: 124" (315 cm), Center deck section: 54" (137.1 cm), Two 37" (93 cm) width of cut wings. 89" (226 cm) width of cut with one wing up.
MOWING RATE
Mows up to 10.4 acres/hr (4.2 hectares/hr) at 8.3 mph (13.4 km/hr). Assumes no overlap or stops.
**Assumes max mow speed and 100% efficiency. Actual mowing rates may vary depending on operator and conditions.
CONSTRUCTION
Welded .100" (2.5 mm) high-strength steel with steel 7 and 10-gauge channel and plate reinforcements.
DECK DRIVE
Direct mounted hydraulic motor into spindle. Remaining spindle(s) driven by individual B section Kevlar belt. Quick-release belt covers.
HEIGHT-OF-CUT
1"-5" (25-127 mm) in .5" (13 mm) increments.
SPINDLES
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm) diameter conical ductile iron housing, and 2 greaseable tapered roller bearings.
BLADES
19" (48.3 cm) long, 2.5" (6.4 cm) wide, .25" (.64 cm) thick.
CASTER WHEELS
8 x 3.50-4, 4-ply, smooth, pneumatic, sealed precision ball bearings.
GROUND FOLLOWING
6" anti-scalp cups on each blade, adjustable skids, 3 anti-scalp rollers on front deck and 1 on each wing.
WING PROTECTION
Impact absorption device on each wing deck.
MULCHING KIT
Model 30419.
SKIDS
Reversible polymetric.