Data Sheet

CAB
Optional Accessories: LED Cab Light Kit, Cab Beacon Light Kit. GM3310 comes standard with a
cab equipped with air conditioning and heat
SNOWTHROWER (ERSKINE)
This is the perfect blizzard battler, with 53” (134 cm) clearing width. 270 degree hydraulically
adjustable discharge chute rotation. Mechanically-driven snow thrower.
ROTARY BROOM (M-B)
The 60” (152 cm) wide mechanically-driven rotary broom cleans and clears snow, dirt, debris
and grass during any season. Hydraulic swing capable of 20° left or right of center. Choice of
poly or combination poly/wire brooms.
BOSS® STRAIGHT-BLADE PLOW
BOSS snowplows are engineered to perform in the worst winter conditions. 60” (152 cm)
clearing width. Fully hydraulic lift and angle adjustment to deliver maximum efficiency.
PRO FORCE® DEBRIS BLOWER
Driven from PTO shaft off engine. Nozzle Rotation – 245°. Great visibility – out front of machine
SUNSHADE
UNIVERSAL MOUNT SUNSHADE
White, Model 30669 / Red, Model 30671
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.
See distributor for details on all warranties.
F60 FLAIL CUTTING DECK
TYPE
Out-front PTO-driven flail attachment
FRAME CONSTRUCTION
Welded, high strength, low weight steel frame body and
6mm end-plates.
FLAIL ROTOR CONSTRUCTION
4" (100mm) Diameter, dynamically-balanced flail rotor.
Greaseable self-aligning roller bearings mounted in rigid
mounted bearing housings. Rotor can be removed from
frame without prior removal of bearings and bearing
housings.
FLAIL TIP SPEED
152.4ft/sec (46.5m/s) tip speed at 2,900rpm
DRIVE SYSTEM
PTO drive from power unit through 90-degree gearbox.
Final drive through twin banded XPZ belt to rotor.
BLADE TYPE
32x TEMPEST™ paddle-style flail blades
ROLLER
4" (100mm) Rear Roller for superb contour following
and striped finish
LIFT ARMS
Dedicated lift arms are supplied as standard with the
F60 to ensure close and accurate mating to the power
unit, improving manouevrability and machine control
CASTOR WHEELS
8 x 3.50-4 4-Ply , pneumatic, sealed precision ball
bearings
HEIGHT OF CUT
0.75"- 3" (20-75 mm), in 0.5" (13 mm) increments
WIDTH OF CUT
60" (152.4 cm)
MOWING RATE**
Up to 6.1 acres/h (2.4 hectares/h)
WEIGHT
564 lbs. (256 kg)
OVERALL DIMENSIONS
Width 67.9" (172.5 cm), Height 18.5" (47 cm), Length
(w/o Lift Arms) 45.5" (115.5 cm), Length (w/ Lift Arms)
61.4" (156 cm)
OPTIONAL ACCESSORIES
Back-to-back 'Y' flail blades for rough mowing
conditions, mulching (shredder) bar, fine cut baffle kit
WARRANTY
2 Years
4
Rev. 2/22
The Groundsmaster 3200 & 3300 are manufactured
in Tomah, WI ISO 9002 Certified Plant.
Groundsmaster
®
3200/3300 Attachments
*