Data Sheet
3
Groundsmaster
®
3200/3300 Specifications continued
*
CUTTING DECKS (SOLD SEPARATELY)
CUTTING DECK
CONFIGURATIONS
60" (152 CM) SIDE DISCHARGE
DECK, MODEL 31970
72" (183 CM) SIDE DISCHARGE
DECK, MODEL 31972
60" (152 CM) REAR DISCHARGE
DECK, MODEL 31971
72" (183 CM) REAR DISCHARGE
DECK, MODEL 31973
CONSTRUCTION
7-gauge (4.5 mm) high-strength steel top shell, 5.5” (14 cm) deep; welded deck
with grass discharged on the right side. A 5/16” (8 mm) thick rubber discharge
chute. Adjustable baffle to control throw distance of clippings.
7-gauge (4.5 mm) high-strength steel top shell, 5.5” (14 cm) deep; welded deck
with a rear rubber flap to direct clippings down through the rear of the machine
SERVICE POSITION
Cutting deck can tip up to the service position from the transport position to conduct routine maintenance quickly. Driveshaft stays connected during tip up.
HEIGHT OF CUT
1”-6” (25 - 152 mm) adjustable in 0.5” (12.7 mm) increments.
SPINDLE ASSEMBLY
Ductile cast iron 9" (23 cm) diameter conical spindle housing; Dual greaseable tapered roller bearings; Spindle shaft is 1.25" (3.2 cm) diameter, solid cold finished
steel, splined connection between spindle shaft and pulley; Welded blade retainer plus anti-scalp cups.
CUTTER DRIVE
Solid mounted, splined PTO-driven gearbox transfers power to three separate spindles via one "B" section belt.
BLADES
Three 0.25” (6 mm) thick, 2.5” (63 mm) wide, heat-treated steel blades.
BLADE TIP SPEED
17,440 FPM (37hp T4 Engine)
18,600 FPM (24hp Engine)
17,470 FPM (37hp T4 Engine)
18,630 FPM (24hp Engine)
16,100 FPM (37hp T4 Engine)
17,175 FPM (24hp Engine)
15,940 FPM (37hp T4 Engine)
17,005 FPM (24hp Engine)
DECK SUSPENSION
Front: fixed, independent high-strength 2" x 0.1875" (5.08 x .47 cm) wall castor arm tubes support welded heavy-duty reinforced 0.375" (9.5 mm) high strength castor forks
with 1.38" (3.5 cm) shafts. Semi-pneumatic (flat-free) 8.2" x 3.1" (20.8 x 7.8 cm) castor wheel with sealed ball bearings. Rear: vertical chain with 0.5" (1.27 cm) diameter pins.
BELT IDLER
Greasable, spring-loaded (torsion) idler
DECK SKID
Replaceable, bolt-on, non-marking UHMW skid on both sides for rear discharge decks and on left side only for side discharge decks. Interchangeable left to right.
ANTI SCALP
Anti-scalp cup located on each blade spindle. Additional anti-scalp gauge wheels.
DECK COVERS
Quick-release type latches, no tools required. Thermoplastic polyolefin reduces weight and noise.
LIFT ARMS
Independent lift arms from traction unit with counterbalance pressure set for optimum QOC and weight transfer.
SHIPPING WEIGHT
450 lbs. (204 kg) 510 lbs. (231 kg) 460 lbs. (208 kg) 512 lbs. (232 kg)
OPTIONAL ACCESSORIES
Recycler kits, blade options (low sail, medium sail, high sail, atomic),
blowout baffle
Recycler kits, blade options (low sail, medium sail, high sail, atomic)
Rev. 2/22
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration
purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.
See distributor for details on all warranties.
**Assumes max mow speed and 100% efficiency. Actual mowing rates may vary depending on operator and conditions.
The Groundsmaster 3200 & 3300 are manufactured
in Tomah, WI ISO 9002 Certified Plant.