Data Sheet

3
Groundsmaster
®
3200/3300 Specifications continued
*
CUTTING DECKS (SOLD SEPARATELY)
CUTTING DECK
CONFIGURATIONS
60" (152 CM) SIDE DISCHARGE
DECK, MODEL 31970
72" (183 CM) SIDE DISCHARGE
DECK, MODEL 31972
60" (152 CM) REAR DISCHARGE
DECK, MODEL 31971
72" (183 CM) REAR DISCHARGE
DECK, MODEL 31973
CONSTRUCTION
7-gauge (4.5 mm) high-strength steel, 5.5” (14 cm) deep; welded deck with
grass discharged on the right side. A 5/16” (8 mm) thick rubber discharge
chute covers the discharge opening to limit the throw distance of clippings.
Adjustable baffle.
7-gauge (4.5 mm) high-strength steel, 5.5” (14 cm) deep; welded deck with a
rear rubber flap to direct clippings down through the rear of the machine
SERVICE POSITION
Cutting deck can tip up to the service position from the transport position to conduct routine maintenance quickly. Driveshaft stays connected during tip up.
HEIGHT OF CUT
1”-6” (25 - 152 mm) adjustable in 0.5” (12.7 mm) increments.
MOWING RATE**
Up to 4.2 acres (1.7 hectares)
per hour
Up to 5 acres (2.1 hectares)
per hour
Up to 4.2 acres (1.7 hectares)
per hour
Up to 5 acres (2.1 hectares)
per hour
SPINDLE ASSEMBLY
Ductile cast iron 9" (23 cm) diameter conical spindle housing; Dual greaseable tapered roller bearings; Spindle shaft is 1.25" (3.2 cm) diameter, solid cold finished
steel, splined connection between spindle shaft and pulley; Welded blade retainer plus anti-scalp cups.
CUTTER DRIVE
Solid mounted, splined PTO-driven gearbox transfers power to three separate spindles via one "B" section belt.
BLADES
Three 0.25” (6 mm) thick, 2.5” (63 mm) wide, heat-treated steel blades.
BLADE TIP SPEED (3000 RPM)
17,500 16,000
DECK SUSPENSION
Independent, 2" (5 cm) square tubing, lift/push arms each attached to separate castor arms.
BELT IDLER
Spring-loaded (torsion) idler
DECK SKID
Replaceable, bolt-on, non-marking UHMW skid on both sides for rear discharge decks and on left side only for side discharge decks. Interchangeable left to right.
ANTI SCALP
Anti-scalp cup located on each blade spindle. Addtional anti-scalp gauge wheels.
DECK COVERS
Quick-release type latches
LIFT ARMS
Independent lift arms and hydraulic weight transfer provide deck flotation.
SHIPPING WEIGHT
450 lbs. (204 kg) 510 lbs. (231 kg) 460 lbs. (208 kg) 512 lbs. (232 kg)
OPTIONAL ACCESSORIES
Recycler kits, blade options (low sail, medium sail, high sail, atomic),
blowout baffle, roller striper
Recycler kits, blade options (low sail, medium sail, high sail, atomic)
OPTIONAL ATTACHMENTS
CAB
Heat only cab that fits ROPS models.
UNIVERSAL SUNSHADE
Universal sunshade, red or white
ROTARY BROOM
60" (152 cm) clearing width, from M-B®.
SNOWTHROWER
53" (134 cm) clearing width, from Erskine®.
SNOW BLADE
60" (152 cm) straight blade, from BOSS®.
Rev. 7/20
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration
purposes only. Actual products offered for sale may vary in use, design, required attachments and safety features.
See distributor for details on all warranties.
**Assumes 7 mph (11.3 km/h) mow speed, no overlap and 100% efficiency.
The Groundsmaster 3200 & 3300 are manufactured
in Tomah, WI ISO 9002 Certified Plant.
60" (152 CM) F60 FLAIL CUTTING DECK,
MODEL 02835
FRAME CONSTRUCTION
Welded, high strength steel frame
ROTOR CONSTRUCTION
4" (100 mm) diameter, dynamically balanced flail rotor.
Greaseable tapered roller bearings mounted in rigid mounted
bearing housings. Rotor can be removed from frame without
prior removal of bearings and bearing housings.
HEIGHT OF CUT
0.75"- 4" (20-100 mm)
MOWING RATE**
Up to 4.2 acres (1.7 hectares) per hour
BLADES
32x TEMPEST™ paddle-style flail blades
BELT IDLER
Mechanical adjustable Idler. Locked with M20 bolt.
DECK SKID
Replaceable, bolt-on steel skid
CASTOR WHEELS
8 x 3.5-4 4-Ply , pneumatic, sealed ball bearings.
LIFT ARMS
Independent lift arms and hydraulic weight transfer
provide deck floatation. Supplied complete with the flail.
SHIPPING WEIGHT
564 lbs. (256 kg)
OPTIONAL ACCESSORIES
Fine Cut Baffle Kit, Mulching Bar, Back to Back Flail
Blades, Replacement Blade Kits, choice of 2x blades or
16x blades (2x per flail required)